How To Setup Cam2Cam:
LiveMasturbation.com is pleased to offer a free cam-to-cam option for our members who have a webcam.
Use this 2-way video feature in a 1on1 private show or member chat with a model so you can view each other and make your experience more intense than a regular private show.
To use this complimentary service, all you need is a webcam that is connected to your computer. Once you enter the shows, simply click
on the cam2cam flash applet (figure 1) to begin sending your video feed to your favorite model.
You can test your setup right now to make sure you do not waste any precious time when you start your show.
Adobe Flash will ask you to allow the software to connect to your camera and audio input. Click the
button to allow cam2cam to work.
This is absolutly necessary for the software to work.
If you click 
cam2cam will not work.
If you prefer to always use our Cam2Cam feature, simply click
on the flash applet above,
go to the 
tab,
mark the 
and click 
(figure 2).
If you have your camera properly installed and functioning, but do not see the image in the flash applet above, you may need to select the proper video input. Click the
button and go to the 
tab.
Select the proper name for the video device you want to use and click
(figure 3).
If you have more questions, visit our or send us an email at: support@inoveo.com
To use this complimentary service, all you need is a webcam that is connected to your computer. Once you enter the shows, simply click
on the cam2cam flash applet (figure 1) to begin sending your video feed to your favorite model.You can test your setup right now to make sure you do not waste any precious time when you start your show.
Adobe Flash will ask you to allow the software to connect to your camera and audio input. Click the
button to allow cam2cam to work.
This is absolutly necessary for the software to work.
If you click cam2cam will not work.If you prefer to always use our Cam2Cam feature, simply click
on the flash applet above,
go to the tab,
mark the
and click (figure 2).
If you have your camera properly installed and functioning, but do not see the image in the flash applet above, you may need to select the proper video input. Click the
button and go to the tab.
Select the proper name for the video device you want to use and click
(figure 3).
If you have more questions, visit our or send us an email at: support@inoveo.com
figure 1:
figure 2:
figure 3:
